My pieces can't connect? Why?

Join Date: 2012-04-15
Post Count: 2121

#149914997Monday, November 17, 2014 12:42 AM GMT

These parts won't connect?! I saw people do this with cars, where they don't use C-frame and have collisions, heck even my friend did it right infront of me! But when I ever I try connect peices by like wielding or Inlets and studs, they won't connect and will fall apart, they would usually leave a slit between each brick, and that's the closet they can connect too? http://prntscr.com/575ga3 But they fall apart when I trying to build a car, but yet on that Roblox U Car building Part 2, the pieces just stick on just fine?!

Aolence

Join Date: 2011-04-25
Post Count: 475

#149915095Monday, November 17, 2014 12:43 AM GMT

Try inserting a weld script into the model you're making. You can look it up on the ROBLOX Wiki here: http://wiki.roblox.com/index.php?title=Welds If you have questions I'll do my best to answer them.

WhoToTrus

Join Date: 2012-04-15
Post Count: 2121

#149915272Monday, November 17, 2014 12:45 AM GMT

Do you have Skype? I barely have any knowledge of scripting?

Aolence

Join Date: 2011-04-25
Post Count: 475

#149915462Monday, November 17, 2014 12:48 AM GMT

I do but right now is a bit late for me - maybe we don't even need skype. I can try sending you some messages or either of us can host a "party".

WhoToTrus

Join Date: 2012-04-15
Post Count: 2121

#149915552Monday, November 17, 2014 12:49 AM GMT

But screen sharing can make us do this faster, also in this video https://www.youtube.com/watch?v=3nn_eQwhBc8 McSparks easily adds the parts on without any scripts but wields.

Aolence

Join Date: 2011-04-25
Post Count: 475

#149915879Monday, November 17, 2014 12:53 AM GMT

Have you tried putting studs on one side of a brick and inlets on another side? (For example) you can see this in the video starting at 0:47.

WhoToTrus

Join Date: 2012-04-15
Post Count: 2121

#149916668Monday, November 17, 2014 1:02 AM GMT

No sir.

WhoToTrus

Join Date: 2012-04-15
Post Count: 2121

#149917478Monday, November 17, 2014 1:13 AM GMT

I just tried it, they still don't connect together, whenever I try to put a part connecting to the other, the other part just retracts like a magnet? Note I have Collision on, I can't C-frame the car my boss says.

Aolence

Join Date: 2011-04-25
Post Count: 475

#149918219Monday, November 17, 2014 1:22 AM GMT

(Just as a side note) you don't have to call me sir, but anyways. I'm not really sure what you're doing wrong - it sounds fine. I'll try it out tommorow myself and see what I can figure out from experimenting. Hopefully I can be of assistance. :)

WhoToTrus

Join Date: 2012-04-15
Post Count: 2121

#149922512Monday, November 17, 2014 2:20 AM GMT

Alright! Thanks....ma'am.

WhoToTrus

Join Date: 2012-04-15
Post Count: 2121

#149926384Monday, November 17, 2014 3:15 AM GMT

Guys, I found out the solution! I had to put my surface, which are located under collisions from "Surface Only" to "Never." And it works, it connects!

RusseAviateur

Join Date: 2012-02-14
Post Count: 2181

#149931474Monday, November 17, 2014 4:32 AM GMT

"Ma'am" LOL