Here is a complete guide on what to do for the ROBLXO Updating Loop:
-------------------------------------------------------------
1) Run a "Full System Scan" on your Virus Protection Program.
Some other important steps:
Windows Vista / Windows 7:
1) Click Start Button, type in "Windows Firewall".
--There may be a few results. Click the one that exactly says "Windows Firewall".
2) Click it to open the window.
3) Make sure your firewall is on.
--If it is not, then click "Turn Windows Firewall on or off".
4) Turn on "Home or Work" firewall.
--Also do this to "Public Places".
5) Click "Ok" to save settings.
Windows 8 / Windows 8.1:
Touch Devices:
1) Swipe from the right side of the screen.
2) Tap the "Search" in the side menu.
3) Search for "Windows Firewall".
--There may be a few results. Tap the one that exactly says "Windows Firewall".
4) Make sure your firewall is on.
--If it is not, then Tap "Turn Windows Firewall on or off".
5) Turn on "Home or Work" firewall.
--Also do this to "Public Places".
6) Tap "Ok" to save settings.
Non-Touch Screen Devices:
1) Move your mouse to the top right side of the screen.
2) Click the "Search" in the side menu.
3) Search for "Windows Firewall".
--There may be a few results. Click the one that exactly says "Windows Firewall".
4) Make sure your firewall is on.
--If it is not, then click "Turn Windows Firewall on or off".
5) Turn on "Home or Work" firewall.
--Also do this to "Public Places".
6) Click "Ok" to save settings.
You may also run a full system scan. You can do the following:
Windows Vista / Windows 7:
1) Click Start, and search for "cmd".
2) Right click "cmd" and select "Run as Administrator".
3) If a code is required, enter it then press "Ok".
4) Type in "sfc/scannow".
--This will check for corrupted and bad files on the PC and attempt to fix them.
5) Let the scan run. Do the required actions it says when it is done.
Windows 8 / Windows 8.1:
Tap Devices:
1) Swipe from the right side of the screen to open the side menu.
2) tap "Search".
3) Search "CMD".
4) Tap and HOLD (for 5 seconds) then select "Run as Administrator".
5) If a code is required, enter it then press "Ok".
6) When it is opened, type in "sfc/scannow".
7) --This will check for corrupted and bad files on the device and attempt to fix them.
8) 5) Let the scan run. Do the required actions it says when it is done.
Non-Touch Screen Devices:
1) Move your mouse into the top right corner of the screen.
2) Click "Search".
3) Search "CMD".
4) Right Click then select "Run as Administrator".
5) If a code is required, enter it then press "Ok".
6) When it is opened, type in "sfc/scannow".
7) --This will check for corrupted and bad files on the device and attempt to fix them.
8) 5) Let the scan run. Do the required actions it says when it is done.
|