Imported helmet,

Join Date: 2009-08-15
Post Count: 294

#181730702Friday, January 15, 2016 11:25 PM GMT

I have an imported helmet that refuses to work with morphs, anyone know the fix? Also I do not have the original import, and whenever I try to un-union the unioned Import it automatically turns it into a red brick.

AecTalek

Join Date: 2008-10-09
Post Count: 1653

#181731307Friday, January 15, 2016 11:34 PM GMT

don't import problem solved http://www.roblox.com/logo11111-item?id=280137339

MediCharge

Join Date: 2009-08-15
Post Count: 294

#181731934Friday, January 15, 2016 11:44 PM GMT

I need the import however, specifically because it would be near impossible to create it with parts without causing lag. Imports are essentially lag-free in my experience, and my game would require to have as little lag as possible.

AecTalek

Join Date: 2008-10-09
Post Count: 1653

#181735504Saturday, January 16, 2016 12:45 AM GMT

make the helmet yourself http://www.roblox.com/logo11111-item?id=280137339

ProjectSlayer

Join Date: 2012-10-04
Post Count: 10148

#181736191Saturday, January 16, 2016 12:57 AM GMT

Try it with an unimported helmet to see if the morph is the problem or the helmet is.

MediCharge

Join Date: 2009-08-15
Post Count: 294

#181738378Saturday, January 16, 2016 1:32 AM GMT

It works with an unimported helmet, the issue is simply that I can't make my own helmet with regular parts or it will become extremely laggy, and I can't figure out how to get the import to work with the morph. Also, technically it loads with the morph but right when you use it it clips through everything below and dissappears.

Telemus

Join Date: 2012-10-07
Post Count: 38725

#181738721Saturday, January 16, 2016 1:37 AM GMT

Did you anchor it?

MediCharge

Join Date: 2009-08-15
Post Count: 294

#181739497Saturday, January 16, 2016 1:51 AM GMT

Yes, I had anchored the helmet. Should I not have?

MediCharge

Join Date: 2009-08-15
Post Count: 294

#181799789Saturday, January 16, 2016 10:38 PM GMT

*bump* Can anyone figure out what's wrong? It just clips through everything while falling down.

Telemus

Join Date: 2012-10-07
Post Count: 38725

#181812111Sunday, January 17, 2016 1:32 AM GMT

give me what you currently have and I'll try to fix it.

MediCharge

Join Date: 2009-08-15
Post Count: 294

#181965209Tuesday, January 19, 2016 12:36 AM GMT

Including the morph? Or the helmet?

Telemus

Join Date: 2012-10-07
Post Count: 38725

#181965226Tuesday, January 19, 2016 12:36 AM GMT

Including the morph.

MediCharge

Join Date: 2009-08-15
Post Count: 294

#182085951Thursday, January 21, 2016 2:30 AM GMT

http://www.roblox.com/Morph-item?id=345981055 I went ahead and put the helmet in it just in case. Hopefully you can fix this, I would be greatful if you could.

Telemus

Join Date: 2012-10-07
Post Count: 38725

#182089649Thursday, January 21, 2016 3:26 AM GMT

I can't take it. Set it to free and I'll fix it in my free time

MediCharge

Join Date: 2009-08-15
Post Count: 294

#182120126Thursday, January 21, 2016 9:15 PM GMT

It was able to be taken, I re-saved it and it should work now.

Telemus

Join Date: 2012-10-07
Post Count: 38725

#182165353Friday, January 22, 2016 4:01 PM GMT

Ok. I'll finish it soon since it's the weekend

MediCharge

Join Date: 2009-08-15
Post Count: 294

#182522475Wednesday, January 27, 2016 10:41 PM GMT

Tis' been a while, any updates / did you figure it out?

Scottifly

Join Date: 2011-01-30
Post Count: 9180

#182550043Thursday, January 28, 2016 8:55 AM GMT

The helmet should be Unanchored so you can move when it's on, but does the morph weld it to your head? It sounds like the Unanchored and Cancollide helmet is not welding and dropping off the map.