|
I want it for all of the limbs but the Right Arm gives me an idea on how to do it. And an explanation would be nice. You would have to some how edit the C1 and C0 right?Thanks. |
|
|
btw, Part0 would be the torso and Part1 would be the right arm. |
|
|
|
@Jarod. Woah thanks. Aint that hard. |
|
|
Ok, I managed to do it but now I am stuck. The parts glued to each other do not collide with one another. The legs and arms can go through the torso. |
|
|
|
IT does not only not collide but the limbs also shake a bit before setteling down. Any ideas? |
|
|
I remember reading somewhere how glue joints could be used to make two parts ignore collisions between themselves. I'm not sure if you can get around it. But I'm quite unfamiliar with the topic.
|
|
|
Thanks for informing me. At least for some hope. I hate when there are 3+ continious posts of mine bumping the thread. |
|
|
|
If you still haven't figured it out, you might try looking for a ragdoll script made by someone else and see how they did it/if it works how you want.
|
|
|
When I did it, I also welded a collision part at the tips of the arms and legs, allowing them to rotate freely but still collide with the ground and torso. |
|
|
That's pretty clever; didn't think of that. |
|
|
Jarod
I did what you told me to do and it worked pretty well. I unioned 4 parts, each goes on one side of the arm and simply cloned and welded it onto each limb. The union looked like this
-
- -
-
Arm being in the middle. Thank you.
|
|
|
The shape messed up. The dot in the middle should be like the one to the left but on the right side.
|
|