ForumsScriptersManual Weld

chevron_left

chevron_left

chevron_left

    of     1   

chevron_right

chevron_right

chevron_right

Manual Weld

BloodDragonII Join Date: 2012-05-05 Post Count: 1187 #227619540Friday, November 17, 2017 12:09 AM GMT Ok so c0 defines where it will hold part 1 relative to part # #### #### ## define it says you should only worry about this when working with motors and I am. also do the parts have to be anchored? Go to point in timearrow_right 10 minutes before 5 minutes before At time of posting 5 minutes after 10 minutes after more_horiz

BloodDragonII Join Date: 2012-05-05 Post Count: 1187 #227619645Friday, November 17, 2017 12:12 AM GMT Also I can walk through whatever part 1 is how do I change it so its solid and I cant? And why does the weld break when I move the part when playing? Go to point in timearrow_right 10 minutes before 5 minutes before At time of posting 5 minutes after 10 minutes after more_horiz

BloodDragonII Join Date: 2012-05-05 Post Count: 1187 #227619736Friday, November 17, 2017 12:15 AM GMT and how coome when i want to rotate part 1 I have to use math.pi instead of math.rad? Go to point in timearrow_right 10 minutes before 5 minutes before At time of posting 5 minutes after 10 minutes after more_horiz

BloodDragonII Join Date: 2012-05-05 Post Count: 1187 #227636857Friday, November 17, 2017 4:16 PM GMT Bump Go to point in timearrow_right 10 minutes before 5 minutes before At time of posting 5 minutes after 10 minutes after more_horiz

chevron_left

chevron_left

chevron_left

    of     1   

chevron_right

chevron_right

chevron_right