C-frame tool in edit mode

Join Date: 2010-06-04
Post Count: 826

#64919819Sunday, March 25, 2012 3:22 AM GMT

I know you can do something in command bar but not everybody knows that if it was there alot of people could make a better place in roblox like a base for there group or make a better looking place some people have ot want this am I right or wrong?

rockintyler8

Join Date: 2011-06-04
Post Count: 2050

#64919904Sunday, March 25, 2012 3:24 AM GMT

Try CMDUTL. ~All that we see or seem is but a dream within a dream. -Edgar Allen Poe~

Fireblast64

Join Date: 2011-02-26
Post Count: 188

#64920882Sunday, March 25, 2012 3:41 AM GMT

Agree.

Abillityx

Join Date: 2011-02-26
Post Count: 3938

#64921244Sunday, March 25, 2012 3:47 AM GMT

http://www.roblox.com/CmdUtl-Command-Utility-v3-0-0-item?id=56988233 Post that link (above) into the adress bar and take the model. Go into ROBLOX Studio and insert the model. After that, copy all 5000 lines from the script into Notepad. Then, save the document. Finally, go to Tools>ExecuteScript and click your document. A GUI will pop up and you can now C-Frame in Studio! Congratz! -Abillityx

xXVegaXx

Join Date: 2011-10-26
Post Count: 7370

#64922023Sunday, March 25, 2012 3:59 AM GMT

I recently posted a forum like this and somebody gave me advice here's what you should do: 1. Open up Roblox studio 2. Open up Build Mode 3. Goto free models and get a Cframe tool 4. Use it and Voila you can move stuff around with Cframe ^^^ Is a good idea too.

NoobOperator

Join Date: 2010-06-04
Post Count: 826

#64926793Sunday, March 25, 2012 5:44 AM GMT

Guys i dont realy like it in build mode i want it in edit mode

Alexrocksdude

Join Date: 2011-01-19
Post Count: 3828

#64926844Sunday, March 25, 2012 5:45 AM GMT

CmdUtl: edit mode. ~If it 'aint broke, don't fix it.~

Arka23

Join Date: 2011-11-28
Post Count: 87

#64927806Sunday, March 25, 2012 6:14 AM GMT

Use a plugin.

Quasar99

Join Date: 2009-11-21
Post Count: 9328

#65666963Friday, April 06, 2012 12:33 AM GMT

CMDUtl.

ewrigley123

Join Date: 2011-03-06
Post Count: 6

#65851610Sunday, April 08, 2012 2:54 PM GMT

THX SO MUCH!

DarkDemon01

Join Date: 2008-09-20
Post Count: 9277

#65855127Sunday, April 08, 2012 3:51 PM GMT

It's called using script cframing.

Bakerley

Join Date: 2009-10-12
Post Count: 12011

#66750956Saturday, April 21, 2012 9:34 PM GMT

If you want to make it extremely specific, look VERY CLOSELY at these steps: 1) Take the CmdUtl v3.00 version from the link above. 2) Go into Edit mode. 3) Go into the toolbox, press inventory, then my models, then insert the CmdUtl script. 4) Go into the script. 5) While in the script, use Ctrl + A to highlight it all, and Ctrl+C to copy it all. 6) Go into notepad. 7) Use Ctrl + V to paste in that script. 8) Click the Save As button. 9) Call it "CmdUtl.lua" without quotations. 10) At the "Save as Type" area, use the drop down menu and click "All Files". 11) In edit mode, click the Tools button in the Toolbar, then Execute Script. 12) Browse for the CmdUtl.lua file you made. 13) Open it. 14) A GUI should now be on your screen [This can take 0-5 seconds.] if it isn't, then you did something wrong. Look VERY closely at the instructions.