When I insert a certain model, it generates at a tilt.

Join Date: 2008-09-18
Post Count: 284

#89078349Tuesday, February 12, 2013 2:01 AM GMT

It's a car I'm building with CFrame. After a recent update I made to it, it generates in my place from the Toolbox tilted up. Anyone else experience this with other models? If you know a fix, please post it. Also, I tried dragging it around by different bricks, with the model grouped and ungrouped. In case you are curious, here is the link, though it isn't free. http://www.roblox.com/R-Diamond-6-item?id=106106754 Thank you!

MahPizzaIsHere

Join Date: 2011-04-30
Post Count: 7707

#89078501Tuesday, February 12, 2013 2:03 AM GMT

This occasionally happens. I don't know a solid fix except to move it around carefully while grouped until it rights itself haha. It's pretty sketchy, but works sometimes.

Scottifly

Join Date: 2011-01-30
Post Count: 9180

#89079104Tuesday, February 12, 2013 2:08 AM GMT

Basically the model is located by the brick that you grab. If the brick is tilted or a wedge it may tilt. Since the release of Studio 2013 though I have heard a few complaints about models not sitting right. I haven't had this issue though.

titan163

Join Date: 2008-09-18
Post Count: 284

#89079386Tuesday, February 12, 2013 2:11 AM GMT

Thanks guys, I'll try some more and see if I can right it. Happy building :D

MahPizzaIsHere

Join Date: 2011-04-30
Post Count: 7707

#89086482Tuesday, February 12, 2013 3:25 AM GMT

I've had this issue since I first came to the site a few years back.

titan163

Join Date: 2008-09-18
Post Count: 284

#89116078Tuesday, February 12, 2013 8:14 PM GMT

Same, but usually I can fix it after a few seconds. This thing just doesn't want to sit right.

ultimate055

Join Date: 2012-09-23
Post Count: 363

#113511358Saturday, September 21, 2013 3:01 AM GMT

Thank you so much, it was the wedge!

Wrought_Bloxon

Join Date: 2011-08-06
Post Count: 9527

#113516289Saturday, September 21, 2013 4:00 AM GMT

You could try this plugin script by tummey2. http://www.roblox.com/Model-rotation-fix-plugin-item?id=126288357 I think I seen somewhere that you could delete the crooked model and insert another, it should be straight.

racinglover

Join Date: 2010-02-13
Post Count: 690

#148519277Friday, October 24, 2014 8:36 PM GMT

^ Thanks from 1 year in the future, it really helped me as I had the same issue as the original thread creator.