HELP ME: Tilting Bricks

Join Date: 2008-04-25
Post Count: 6

#1319796Thursday, June 12, 2008 2:11 AM GMT

how do i tilt bricks???? ex: making ramps or slopes NOT STAIRS!!!!

Join Date: 2007-09-07
Post Count: 918

#1319949Thursday, June 12, 2008 2:25 AM GMT

Make to 1x1 bricks with hinges Anchor them Put a brick in between them that you want tilted Press the Play Button (near the pause thing and stuff..) When it's tilted enough, anchor it. Copy it. Press the Stop button... And paste. Use the move (with the orange arrows) tool, instead of the other one, it will just untilt it.

Sandra

Join Date: 2007-06-22
Post Count: 169

#1320044Thursday, June 12, 2008 2:35 AM GMT

Thers an easier way, u know. Here are the steps: 1: Get a brick and make it as big as you want it to be. 2: Get another brick and make it 1 stud wide and longer than the brick you want tilted. 3: Make sure your bricks are anchored. 4: Place the tilting brick on top of the thin brick and make it go over only one sine of it with its edge on the thin brick. 5: Un-anchor it. 6: Anchor it when the other end of it touches the ground. 7: USE THE ORANGE MOVE BRICK TOOL NEXT TO THE RESIZE TOOL ON YOUR TOOLBAR. DO NOT USE THE MOVE MODEL TOOL!! Also you can get a slanted brick model.

Lokiu

Join Date: 2008-04-25
Post Count: 6

#1331111Friday, June 13, 2008 12:25 AM GMT

ok thanks for all your help guys

giraffesman3705

Join Date: 2008-06-15
Post Count: 43

#1946983Wednesday, July 23, 2008 12:17 PM GMT

YO GUYS YOU SEAM TO KNOW ALOT. SO DO YOU BY ANY CHANCE KNOW HOW TO MAKE THE SLIGHTLY ROTATED BRICKS? THE ONES IN ALL THE OBBIES THAT HAVE STEPS THAT DISAPPEAR(DONT SAY HOW TO AMKE THEM DISAPPEAR) BUT HOW DO YOU MAKE THE ROTATED? NOT ALL THE WAY I MEAN HOW TO ROTATE THEM A LITTLE BIT?