of     1   

Mr_Olympia
#163913042Sunday, June 07, 2015 3:57 AM GMT

SHORT DESC FLOATING WHEN I SHOULD BE FALLING http://prntscr.com/7e1hsn MORE IN DEPTH Im building a map with a big hole in the center, and im using negatives and uinions to do this like this:http://prntscr.com/7e1dyr After that union, i want another one to create a slot in the walls of the hole like this:http://prntscr.com/7e1e6n This leaves me what i wanted, mostly : http://prntscr.com/7e1eap I want the main grey brick to be solid, but i want you to be able to fall through the hole down to the bottom. My problem is that i can stand over the hole and float, i dont fall. How do i turn the negative blocks walkthrough but the main grey one solid?
Mr_Olympia
#163913115Sunday, June 07, 2015 3:58 AM GMT

1
Mr_Olympia
#163913194Sunday, June 07, 2015 3:59 AM GMT

2
Mr_Olympia
#163913236Sunday, June 07, 2015 3:59 AM GMT

3
Mr_Olympia
#163913295Sunday, June 07, 2015 4:00 AM GMT

4
Mr_Olympia
#163913341Sunday, June 07, 2015 4:01 AM GMT

5
Mr_Olympia
#163913429Sunday, June 07, 2015 4:02 AM GMT

6
Mr_Olympia
#163913508Sunday, June 07, 2015 4:04 AM GMT

7
Mr_Olympia
#163913741Sunday, June 07, 2015 4:07 AM GMT

8
Mr_Olympia
#163913926Sunday, June 07, 2015 4:10 AM GMT

9
Mr_Olympia
#163914101Sunday, June 07, 2015 4:13 AM GMT

10
Mr_Olympia
#163914289Sunday, June 07, 2015 4:16 AM GMT

11
Mr_Olympia
#163914470Sunday, June 07, 2015 4:19 AM GMT

12
TC8950
#163915264Sunday, June 07, 2015 4:34 AM GMT

13 I had a similar problem a while back, but the only solution I found was by making the unions nocollide, and then adding invisible collided bricks for the outer collision.

    of     1