|
loot99Join Date: 2009-07-24
Post Count: 4816 |
Support >:O |
|
chriseonJoin Date: 2009-08-25
Post Count: 1324 |
I support this head on. |
|
xvgigakidJoin Date: 2008-06-22
Post Count: 4407 |
Its because the axis are off.
The axis should be symmetric. If they were it would be fixed.
Ex,
A bricks position would be 1.2,2,1.2.
I dont want the .2 when im just dragging the brick around |
|
Gir554Join Date: 2009-01-14
Post Count: 2780 |
I have noticed there is a gap sometimes and it's very annoying because then yu have to reposition the whole,in this exemple,roof |
|
|
|
|
|
Big support, I was trying to make gutters and it ALWAYS came up two-tenths of a stud short (or one fifth :) |
|
|
Support.
Hate it when that happens..
--kthnxbai |
|
|
Roblox Studio, Explorer, click the part, properties, fix the size. Or you can click the 1/5 and use the resize tool. |
|
|
|
Hm. I think I know the problem, then. I think it is that the brick turns unintentionally. If you try it, you will see that a sideways brick will be a different height as a normally turned brick. That has also happened.
I'm not exactly sure, so I'm going to support anyway. |
|
|
Support. I don't think the flashing brick when c-frame can be fixed though. Thats how the collisions are calculated. You could use block meshes to make it look smoother or with no gap. But that requires c-framing and you cant use meshes. |
|
|
ig88111Join Date: 2008-06-16
Post Count: 3278 |
supported |
|
|
omg i buiilt a hosue and it got ruined not rains gonna get in :c SUPPORT |
|
|
EspithelJoin Date: 2009-10-09
Post Count: 20917 |
what is happening is the bricks are of a different brick style/format/type.
for example, if you have a plate, then a symetric brick on top, a symetric brick on the ground will be 0.X lower down.
simply build your strurtures entirely of plates, bricks or symetric. sorted.
i recomend sumetric, so pressing T wilst moving does't mess it up. |
|
|
I have this problem. Support. |
|
|
|
Use the same brick but make it smaller height-wise and use a cframe tool to fill the gap... |
|
|
I threaten it with a hammer that tends to work |
|
NikilieJoin Date: 2011-06-28
Post Count: 6132 |
Support. |
|